Signed in as:
filler@godaddy.com
Signed in as:
filler@godaddy.com
These are your must have wildland fire fighting tools.
Extremely durable design and available in 52" or 60" handle
A must have for any grass fire call. Used to 'swat' or stomp out small annoying fires. 60" long handle and swatter is angled to ensure full surface contacts ground.
The McLeod tool is a combination of a hoe and a rake and can be used for clearing brush and debris as well as constructing fire lines.
The Combi-Tool is a combination shovel and pick all in one. This multipurpose tool is used to shovel, pick, scrape, and cut all in the convenience of a single tool. Made to meet US Forest Service specifications. Every wildland firefighter should have one in their tool stash! Wood handle only. Made in the USA.
A necessity for wildland firefighters, this Pulaski axe is equipped with a hand-sharpened, single bit edge and mattock blade.
Firefighting nozzles from 1" to 2.5" including selectable flow rates and piercing nozzles.
• Constant gallonage nozzle with multiple flow settings available
• Durable lightweight alloy design
• Stainless steel spinning teeth
• Stainless steel ball enables ball shut off handle to work smoothly at extreme ranges
• Straight stream to wide fog and flush without shutting down
• Permanent anodized metal indicator bands
• Metal horseshoe handle Features
• Female inlet swivel with strainer
• Wide fog for maximum operator protection
• 100 PSI (7.0 BAR) standard, optional 50 PSI (3-1/2 BAR)& 7
• Stainless steel spinning teeth
• Stainless steel ball enables ball shut off handle to work smoothly at extreme ranges
• Multiple pattern detents for positive positioning
• Female inlet swivel with strainer
• Wide fog for maximum operator protection
• 100 PSI (7.0 BAR) standard, optional 75 PSI (5 BAR) see page 5
• NFPA 1964 compliant
• All nozzles include pistol grip
• NH or NPSH threads
• Durable lightweight alloy design
• Slide valve control
• Straight stream to wide fog and flush without shutting down
• Female inlet swivel with strainer
• Wide fog for maximum operator protection
• Permanent anodized metal indicator bands
• Metal horseshoe handle
• Molded fixed teeth for fog
• NFPA 1964 compliant
• All nozzles include pistol grip
• NH or NPSH threads
• Steel Point
• Dense Fog Pattern
• 3’ length
• 1-1/2” continuous swivel inlet
Everything from foam to eductors to foam tubes and nozzles.
Class A
• Use for Class A fires
• Concentrated .1%-1% AFFF
• Meets NFPA 1150-99
• Environmentally friendly
Class B
• Use for Class B fires
• Concentrated 3-6% AR-AFFF
• Meets NFPA 1150-99
• Environmentally friendly
Class A/B
• Use for Class A & B fires
• Concentrated .1%-1% Class A 3-6% Class B
• Meets NFPA 1150-99
Training
• For training only
• Concentrated 1-6% AFFF
• Environmentally friendly
• Lightweight alloy construction
• Check ball to prevent backflow
• Large easy to read metering device
• Metering valve with 6 settings: 0 (shutoff), ¼, ½, 1, 3, & 6%
• Detachable metering device for quick and easy cleaning
• Rated to flow at 200 PSI
• Designed to quickly attach to pattern bumper of Crestar nozzles
• Ideal for use with all types of foam
• Enhances the expansion of foam solution and delivers longer reach and heavier foam blanket
• Foam ratio up 14:1
Medium Expansion Foam Tubes
• Designed to quickly attach to pattern bumper of Crestar nozzles
• Ideal for use with all types of foam
• Constructed of stainless steel for extended life
• Foam ratio up to 50:1
Replacement foam tubes available
Add a footnote if this applies to your business
Designed by firefighters, for firefighters. This all in one tool is 37mm line wrench, 45mm line wrench, gas shut off, glass break tool, O2 bottle shut off but most importantly, it is a hose handling tool! It allows you to hold your hand in proper alignment for holding and moving both 37mm and 45mm hose lines. Available in red or blue and optional custom etching.
Available in 6 or 8 lb with drop forged - high carbon steel heads that are bonded to the 36" long fiberglass handle that features a non slip grip. Hi-Viz Orange, Hi-Viz Lime or Yellow.
Available in 6 or 8 lb with drop forged - high carbon steel heads that are bonded to the 36" long fiberglass handle that features a non slip grip. Hi-Viz Orange, Hi-Viz Lime or Yellow.
Made in the USA, available in a 30" length, drop forged with high carbon steel, fully heat treated and zinc plated.
Available in 6 or 8 lb with drop forged - high carbon steel heads that are bonded to the 36" long fiberglass handle that features a non slip grip. Hi-Viz Orange, Hi-Viz Lime or Yellow.
Individually packaged carcinogen removing wipes. An absolute necessity for firefighters to have with them. Can be carried by firefighters or left in the truck but are intended to be used immeidately when doffing gear.
Multiple use and easy to store, this is your ideal solution for keeping 45 carcinogen wipes on the fire trucks. It is recommended that fire fighters properly clean themselves after exposure to fires toxic chemicals.
The same cleaning capacity as the Field Wipes, these cotton towels are much stronger to help firefighters get a thorough clean. Especially effective after more nasty calls then your typical fires.
Bulk storage with easy access to Field Wipes. This is the ideal way to provide access to carcinogen cleaning wipes at the hall. Simply order replacement wipes to restock your wall mounted dispenser.
When it comes to removing carcinogens and toxins from your body after exposure at a call, this soap will impress you with how well it cleans you. Firefighters have reported complete elimination of 'that fire smell' after just one wash!
Concentrated Full Spectrum laundry and PPE soap. Safe for use in extractors. NFPA 1851 Compliant. 5 gallon pail.
For on-scene preliminary gross decontamination of PPE. Remove particulates away from the firefighter's turnout gear to mitigate cross-contamination. This design easily rinses, leaving no residue on the turnout ensemble. Available in 1 US Gallon Ready To Use or concentrate.
Get the most out of your turnout gear by using the proper soap to clean it. Did you know that using the wrong soap can actually damage your gear, reducing it's effectiveness and life.
Get the most out of your SCBA by using the manufacturer recommended soap to clean and disinfect it. Proper hygiene that includes disinfecting your mask is your best defense against the unknown viruses and contaminants out there. Neutral disinfectant for Drager SCBA.
Decontaminate up to 2 complete SCBA per wash cycle. Improves efficiency by cleaning up to 20 packs in 1 hour. You can also clean gloves, boots and helmets.
We will continue to add decontamination, disinfecting, firefighting tools and equipment for our customers in Manitoba, Saskatchewan and NW Ontario. Please check back or contact us if you do not see what you are looking for.
The right choice for departments that do a lot of wildfire calls or who generally remain on scenes for extended periods of time. Full carrying system includes hip belt to relieve the weight from your shoulders. 5 gallon capacity with various pockets.
Much more comfortable to wear and easy to store. 5 gallon capacity and pump is serviceable.
Most economical choice for a backpack sprayer. 5 gallon tank with serviceable pump. Very cost effective but bulky to store and not the most comfortable to wear.
Available in either 1" or 1.5" diameters and come standard with twist lock connections.
Adjustable pattern and lightweight design. Twistlock adapter is standard.
HD Brass design makes this nozzle extremely tough. Adjustable pattern and twistlock adapter is standard.
The most feature packed camera on the market. Adds 8 functional modes over the UCF8000 that are specially designed for each scenario and a standard digital camera. Modes are: Fire Search, Persons (search and rescue), Thermal Scan (searching for hot spots), Outdoors (searching for persons outside), Hazmat mode, Scan Plus - the best choice for overhaul (real image with thermal overlay, clearly showing where hot spots are loated and/or what locations have been cleared of hot spots) Still image visual camera function, video recording with audio and freeze frame function for viewing difficult areas.
Adds a high resolution screen over the UCF7000 for more clear images. Records still images, freeze frame and video with audio. All thermal imaging cameras are intrinsicly safe and come with a laser pointer function. Cameras are designed for easy one hand use (even with a glove on) and can be used for crawling.
Our standard thermal imaging camera that the 8000 and 9000 are built off of. Standard features include USB cable uploads to computers, Image and video recording, selectable features and customization with optional computer app, including custom home screen - a great place to put your departments crest. All cameras are intrinsically safe with an extremely quick shutter speed. Battery life of up to 4 hours with auto standby mode to preserve battery life.
Included with TIC kits, allows camera to be charged standing up with kick plate installed with a second battery on side. Smart charger meaning you can leave it on charge until you need it. Only suitable to stable location.
This is the correct option for mounting your TIC in a vehicle. Securely holds camera while charging it.
Optional kick plate that turns your handheld camera into one that you can crawl with. Supports the camera for standing upright on flat surfaces and in charger. Having the ability to crawl with your camera makes bringing a TIC much easier.
Keep your hands free with this retractable lanyard. Strong enough to last and easy enough to use. Will work with and without kick plate.
Keep a spare battery on hand for extended calls or busy stations.
Copyright © 2019 Pro Upfitters Ltd - All Rights Reserved.
Powered by GoDaddy Website Builder